Classification
Deck Wall Fence Garden
Home / 2x10 treated wood retaining wall
  • How to Build a Pressure Treated Retaining Wall Hunker

    Pressure treated wood should only be used for low retaining walls and limited to areas that have good drainage. Since wood does not bear an equal amount of pressure, per square inch as does concrete or other masonry, opt for a stronger material if your wall will be higher than 2-feet.

  • 2 in. x 10 in. x 12 ft. 2 Pressure-Treated Lumber-

    Use for decks, play structures, raised beds, planter boxes, retaining walls, walkways, outdoor furniture, landscaping and other outdoor projects where lumber is exposed to the elements Effective against termites, rot and fungal decay

  • How to Build a Strong Retaining Wall with 4x4 Treated Post

    The instructions for building a retaining wall out of 4x4 treated post aim to help ambitious homeowners and do-it-yourselfers tackle this task. If you appreciate the satisfaction of creating visually appealing and utilitarian property features, start with step 1

  • Retaining wall with 2x12 pressure treated wood 2 in 2018

    Retaining wall with 2x12 pressure treated wood 2 by Humboldt Landscape, via Flickr . Read it. Retaining wall with 2x12 pressure treated wood 2. September 2018. Treated Wood Retaining Wall Ideas - Changing up the interior wall colours of your residence is a way to create a huge impact without undertaking an How to Build a Treated-Wood

  • Wooden Retaining Walls - Landscaping Network

    Wood retaining walls are affordable and can be very attractive. In the right setting, a timber retaining wall blends into a landscape more naturally than any other material. When stained to match a log or cedar clad home, it carries the house materials into the landscape for a more unified

  • Building a retaining wall with pressure treated lumber

    I'm planning on building a 20' to 23" retaining wall using green pressure treated wood. I've seen other designs but wondered if there were any concerns with my design. My plan is to put 4x4's into the ground about 18-24" deep on 4 foot centers.

  • How to Build a Wood Retaining Wall: 10 Steps with Pictures

    Edit Article How to Build a Wood Retaining Wall. Building a wood retaining wall can keep your topsoil from washing away down a slope, and it can be turned into a terraced garden for planting anything from vegetables and flowers to small shrubs and trees.

  • How to Build a Treated Wood Retaining Wall The Family

    Eliminate steep, difficult to mow slopes, stop erosion and create attractive planting beds with an easy to assemble wood retaining wall. It uses lightweight materials to create a strong durable wall. It uses standard treated dimensional lumber.

  • How to Build a Retaining Wall The Family Handyman

    The skeleton of the wall is a treated wood, 2×4 stud wall clad on both sides with 1/2-in. treated plywood. Its held in place with 2×4 dead men assemblies buried in the backfill. The dead men are 2×4 struts bolted to the wall studs and anchored to a perpendicular 2×4 sleeper see Figure A .

  • Build a Retaining Wall - Extreme How To

    The lumber for this wall will be ACQ pressure-treated 6-by-6 and 2-by-8s with double hot-dipped galvanized fasteners. Theres no beating pressure-treated lumber in ground-contact situations. The reason for double hot-dipped galvanized fasteners, as opposed to electro-galvanized or coated, is that the new formula for pressure treating

  • Retaining wall with 2x12 pressure treated wood 2 Handy

    Retaining wall with 2x12 pressure treated wood 2 by Humboldt Landscape, via Flickr . Read it. Retaining wall with 2x12 pressure treated wood 2. Wood retaining wall Nice for hillside behind house. white fence and stained wood Pressure treated lumber retaining wall with steps and walkway. Retaining wall is tiered Lilburn, Ga

  • Building an Easy and Inexpensive Retaining Wall - YouTube

    There are many materials that can be used to build a retaining wall. I chose the cheaper route by using 2x10 and 2x6 ground contact treated pine.

  • building a retaining wall with pressure treated wood

    Our front yard is elevated off the street about four feet, so we decided to cut out a driveway area for our tenant and build some sort of retaining wall structure to hold back the lawn area.

  • 2x8 Lumber Retaining Wall - green composite decking

    Products Case. How to Build a Treated-Wood Retaining Wall. No heavy timbersbuild this sturdy retaining wall with lightweight, off-the-shelf treated lumber Online Service . Building a retaining wall with pressure treated lumber

  • How to Build a Timber Retaining Wall This Old House

    1. 1x3 wood stakes and nylon string, used to establish layout lines for timbers 2. 6x8-inch pressure-treated landscaping timbers, used to build retaining wall 3. Wood preservative, to treat cut ends of timbers 4. ¾-inch stone, used as base and drainage material 5. Landscaping filter fabric, used to prevent soil from clogging drainpipe6. 4-inch-diameter perforated drainage pipe, for draining

  • Pressure Treated Lumber Industrial Wood Products

    Long-lasting Treated Wood Products. Pressure treated wood is the most cost-effective building material available. It is long-lasting, has an exceptional strength-to-weight ratio, and it is easily workable with standard tools and skills.

  • 2 in. x 10 in. x 16 ft. 2 Pressure-Treated Lumber-

    Use for decks, play structures, raised beds, planter boxes, retaining walls, walkways, outdoor furniture, landscaping and other outdoor projects where lumber is exposed to the elements Effective against termites, rot and fungal decay

  • Retaining Wall questions Fine Homebuilding Breaktime

    Retaining Wall questions. Retaining Wall questions post Jack Stanton on Sun, 08/12/2001 when I was thinking about putting in a couple of retaining walls, myself. I am thinking about screwing treated 2x10's to the posts horizontally all the way up .

  • Sales Dept : (+86) 21 61182468
  • E-mail :[email protected]
  • Address :N0.2500,Xiupu Road, Kangqiao Industrial Area, Pudong, Shanghai